Es nervt mich nun wirklich. Seit 5 Tagen lasse ich die "Installation" laufen. Sie ist auch nach 5 Tagen nicht beendet, auch wenn ich alle anderen Fenster schliesse wie gewünscht. Es popt 3 mal täglich auf meinem Bildschirm auf und stresst einfach unglaublich. Was ist das Ziel davon, wenn es den Arbeitfluss non-stop unterbricht.....
Petra Knoblauch - 5 months ago
Es fängt an zu nerven. Seit Tagen poppt alle 15 Minuten das Fenster über meinem Arbeitsbereich auf und versucht, die Pulse Secure Software zu deinstallieren. Leider erfolglos, weil diese Software nicht auf meinem Rechner gefunden wird. Das stört den Arbeitsfluss enorm!!!
Ben - 6 months ago
The update often fails without visible reason and there is no option for retry
Michael - 8 months ago
Schrott als Dauerschleife. 5 bis 10 mal am Tag poppt ein Fenster auf und stört bei der Arbeit.
Dirk Lessing - 8 months ago
Every time I log on UEM tries to update but fails just to irritate me later. Absolutely rubbish!!!
U.B. - 8 months ago
Every day when I start the computer, I get a message from the Empirum client (v. 21.0.1) that it wants to update to v 21.0.1 and it does.
Every day the update is successful.
Why does the client update itself every day if it has the same version???
Olli Garch - 1 year ago
Several unsuccessful installation attempts per day. Slows down my work and very annoying.
Problems do not need upgrades.
Get lost.
Sabine Hausmann - 1 year ago
Why can I not adopt the width of the colums? I cannot see the version of the application which is installed on my computer.
Uwe - 1 year ago
keine Möglichkeit von Auswahl, Abbruch
keine Steuermöglichkeiten
Paul Portmann - 1 year ago
Update does not work. Period. Please stop annoying me.
Antonien - 1 year ago
Not so good. the auto update is not working properly (visual ++ by example) we need very fast a feature to allow the agent to rollback if the update failed ...
we got too massive upload/download of log files for somes computers.
the 3 last UEM agent were not very reliable ...
Ca Nguyen - 2 years ago
Hi,
Please stop installing Acrobat DC version 32bits.
Thanks,
Muhsin - 2 years ago
Es kommt immer wieder die Meldung "Installation fehlgeschlagen" ohne zu wissen, weshalb. Es ist sehr nervig, wenn immer wieder diese fehlgeschlagenen Installationsverusche aufpoppen.
Marco - 2 years ago
Es kommt immer wieder die Meldung "Installation fehlgeschlagen" Ich vermisse hier, warum die Installation fehlgeschlagen ist? Könnte man da User-seitig noch was verbessern (alle Programme beenden, Prozesse beenden, etc.). Es ist sehr nervig, wenn immer wieder diese fehlgeschlagenen Installationsverusche aufpoppen.
Jens - 2 years ago
* update-Verlauf: Kommentar von Markus (1 week ago): sehe ich auch so Vorschlag: updates in liste aufführen, mit Status dahinter: fehlgeschlagen, erneuter Installationsversuch am Datum, um Uhrzeit; erfolgreich.
* Kommentarfunktion: Es wäre gut, wenn man für Kommentare andere Benutzer voten könnte, bzw. sich auf diese beziehen könnte. Entweder durch Antworten auf einen Kommentar oder durch Bezug auf die Zeitangabe, diese müsste dann aber auch in den Kommentare in der Form: Datum - Uhrzeit stehen - ein Angabe 1 week ago ist hier nicht hilfreich.
Markus - 2 years ago
updates, die fehlschlagen, verschwinden einfach. ist das update nun irgendwann erfolgreich nachgeholt worden? oder hängt das noch? was ist in der vergangenheit installiert worden? keine ahnung. der client gibt diese Info nicht her.
Leif - 2 years ago
ich kann ein Update verschieben, aber ich kann nicht am Ende des Tages sagen: jetzt wäre gut
Jerome - 2 years ago
"Installieren und herunterfahren" - nur dass man nirgends sehen kann, was installiert werden soll. Muss doch aber möglich sein, wenn das Paket scheinbar auch schon vom Server gezogen wurde...
Arno Dübel - 2 years ago
ne gar kein bock hahaha
Hölscher - 2 years ago
eowp.exe wird nicht beendet und verhindert das Herunterfahren
d.schr - 2 years ago
Fenster popt immer auf ohne update... nervig
Jeremias Münch - 2 years ago
Sync between Server and Empirum Agent not pretty good.
Software always gives oppurtunity to install and reboot, also
there is no new software !
Hansi Obermaier - 2 years ago
Also meine erfahrungen sind wirklich nicht besonders.
Der Client hängt oft mit schwarzem bildschirm und zwingt mich unnötiger weise zu einem neustart.
Installationsvorgänge schlagen häufig fehl und halten mich von der eigenlichen arbeit ab.
Das verschieben von installationen funktioniert auch nicht immer und teilweise wird sogar für das gleich softwarepaket mehrmals am tag ein zeitpunkt für die installation angefragt, obwohl dieser schon mit "morgen" bestimmt wurde. Das nervt einfach nur !!!
Ich kann mir nicht vorstellen, das es heutzutage keine bessere art und weise gibt software zu diesem thema bereitzustellen !
Im grunde sollte diese software für den anwender einfach unbemerkt im hintergrund seine arbeit machen und kein weiteres problem für anwender und it werden.
Carsten Skouboe - 3 years ago
I dont have access
IT - 3 years ago
a better synchronization between client and server and in empirum smarter structure which works for all perfect and better explanation for installation error logs
Daniela - 3 years ago
Das Update wurde "erfolglos beendet", weil Outlook nicht beendet werden konnte.
Die Updats funktionieren nicht. Wenn diese Vorgehensweise unsere Zukunft ist, dann sehe ich sehr schwarz für diese Firmen die das benutzen.
Jens Sproll - 3 years ago
Ich bin sehr zufrieden damit!
Aymeric - 3 years ago
Not functional as expected. When a installation is running if you refresh the tab "task" the installation disapear and you can't see them anymore... , the right clikc on the tray icon have the same beahviour.
Jan - 3 years ago
Like others before:
An installation fails, but Matrix is trying it again and again and for me as user no way? to stop this ridiculous behaviour, and IT dept will take many days to fix it.
Very annoying
Jochen Pick - 3 years ago
Matrix42 runs into error and didn't get the deinstallation done. It pops up since one week
Konstantin Kraider - 3 years ago
Google Earth: nachdem ich auf installieren drückte ist ....nichts passiert. Hängt in der Warteschleife fest, ohne dass sich etwas daran ändert. Passiert immer wieder das selbe mit diesem Programm wenn ich nach einer Zeit abbreche und es erneut versuche (im homeoffice).
Die anderen Programme, die ich im Büro installiert habe, wurden reibungslos installiert. Danke!
user - 3 years ago
same user as from comment below. It's doing the same installation as yesterday. And I am only able to view this feedback form when downloading the install - when postponing the window closes before I can take any action.
user - 3 years ago
+1: Dauerinstallationen: Matrix sollte nicht stupide die Installation (evtl. auch fehlerhafter) Packages wiederholen. Nach x Versuchen bitte nicht mehr die Installation versuchen, sondern Rückmeldung an Admin oder ähnliches.
+ multiple requests for an update everyday even though I postponed it to the next.
if I install from Homeoffice (vpn) after the reboot my installation fails (I'm guessing bc no intranet). Then the cycles repeats. useless...
Florian - 3 years ago
Resourcenverschwendung: für solch eine Anwendung sollte kein kompletter Chromium verwendet werden.
Dauerinstallationen: Matrix sollte nicht stupide die Installation (evtl. auch fehlerhafter) Packages zu wiederholen. Nach x Versuchen bitte nicht mehr die Installation versuchen, sondern Rückmeldung an Admin oder ähnliches.
Peter Wachter - 3 years ago
Matrix42 Patch-Management Client Fix 20.0 => Finsihed without sucess An error occured during the Installation
Das ist alles? Was soll der Anwender nun tun? Wie soll das funktionieren???
dfsf - 3 years ago
dfsf
Markus S. Oeder - 3 years ago
Verbindung zum Server nicht möglich. Was ist da los? #vote
Silke Morisse - 3 years ago
Ich bin genervt feststellen zu müssen, dass hier bereits seit über 4 Monaten über die Problematik berichtet wird ohne das dieser bug zwischenzeitlich gefixt wurde. ich kann mich also nur meinen Vorrednern anschließen und eine Kerze ins Fenster stellen mit der Hoffnung, dass dieser erfolglose sich stündlich wiederholende Installationswahnsinn bald ein Ende hat.
Robert Hickmann - 3 years ago
Every day Matrix tries several times to update the OneIdentityDefenderDesktopLogin on my Dell Latitude E5530 and fails. The installation is been aborted with no error message. It just says "Erfolglos beendet".
Norbert Lehmann - 3 years ago
currently, I'm getting an Update of Azure Information Protection v2.8.85.0 every ½ hour ALL OVER AGAIN asking me to close any open Office App (Word, Excel etc.) additionally closing Outlook WITHOUT any prior notification.
Has been like this for three days in a row now!
I'm starting to get furious!!
Mika - 3 years ago
Forced Reboots are a No-Go!
After Installation a shutdown/restart is initiated without any possibility to intervene or even save my work.
All unsaved things are lost in the process.
Please Fix this issue.
Guido - 3 years ago
Das Programm ist ne absolute Katastrophe. Andauernd popt ein komplett schwarzes Fenster auf, das sich nur über den Taskmanager mit Kill Process schließen lässt. Das behindert dermaßen die Arbeit da das Fenster immer wieder in den Vordergrund tritt. GEHT GAR NICHT !!!
Friedemann Frank - 3 years ago
Ich darf mich meinen Vorgängern anschließen: Es wird andauernd versucht, dasselbe Update einzuspielen, obwohl die Installation erfolgreich war. Das stört auf Dauer, zumal die betroffenen Programme dafür geschlossen werden müssten, es erscheint ein entsprechender Hinweis. Die Matrix scheint Unter-Unterversionen nicht zu erkennen, um entscheiden zu können, ob ein Update erforderlich ist oder nicht.
Lisa Huo - 3 years ago
install “SAP C4C Add-in for Microsoft Excel”but failed every time,try to install with wireless network or wired network but all failed
Richie - 3 years ago
In letzter zeit die totale Katastrophe.
Arbeiten ist kaum möglich, da der Client permanent das gleiche installiert
James R. Dillman - 3 years ago
Software keeps trying to load and fails, repeats and fails, repeats and fails, on and on without resolution! Please fix this or remove it from my computer, it shows up every 20 minutes trying to load.
Sascha - 3 years ago
Funktioniert einfach nicht. Läuft dauerhaft auf Fehler 503
Anselm Vogler - 3 years ago
This Installer keeps opening up since a few days and wants do do something. But it fails to accomplish whatever it tries. I have successfully connected via VPN to UHH but that did not enable this Software to do any better.
Jan - 3 years ago
Update VPN Client vom Tool fehlgeschlagen - nun deinstalliert, . HomeOffice somit ohne Verbindung zum Server in RK.
Lucas - 3 years ago
Your Tool deinstalled my VPN Client because it wanted to install "a newer version" which was supposed to take only 5 minutes. Well, de-installation of the "older" VPN Client was officially not successful after 20 minutes, even though all of the data was deleted for good. The installation of the "new" VPN Client was unsuccessful. NOW I HAVE TO WORK without VPN from home ? - But that is not possible !!! I will have to drive now for 110 km to my headquarters to get that fixed (let it be fixed by some Admin) - of course I am not getting paid for that and I have to visit the headquarters even though there is the corona shut down. If You Programmers only knew how much havoc You cause by releasing programs that just don't work as promised. Your program is a piece of BS to me which causes unforeseen extra effort on my side to do away with the effects Your miserable program has caused. I hope my company does not prolong the contract with You.
Guido Flücht - 3 years ago
Bei poppt immer ein schwarzes Fenster ohne Inhalt auf. Dieses lässt sich nur über den Taskmanager mit Prozess beenden schließen.
Ape - 3 years ago
INFORMATION: this feedback-feature is just to give the developers from Matrix42 feedback.
it is NOT for complaining over bad packages from your IT-Department.
If you have problems with packages, contact your IT-Department, most of the time they dont even know that you got errors.
Rocking 2006.X Extended Support, almost flawless. Keep up the good work Matrix.
Michael Pilch - 3 years ago
Wie oft wollt ihr noch den vergeblichen Versuch starten Unify zu installieren ohne vorher die notwendigen Microsoft Zusatzprogramme zu installieren?
Andreia Amaral - 3 years ago
Installation of Visio has been unsuccessful for over a week now. Unreliable.
Russ Dougherty - 3 years ago
2019 Revit deployment has constantly downloaded but is constantly Erroring out. This has been going on for a week.
Dirk - 3 years ago
3rd attempt to install the first package. Not good
Anupam Sharma - 3 years ago
For the last few weeks I seem to be stuck in a perpetual boot loop due to a Windows 1909 UMI update. It looks like it is some sort of language related part of Windows. The update keeps failing and trying again multiple times each day, and it needs a reboot every time!
Fred Schmid - 3 years ago
Software installation is failing every time.
Frederik Riediger - 3 years ago
Too slow, Installing software takes forever! Not usable.
Andreia - 3 years ago
Software install finished without success several times.
Doug - 3 years ago
Every 20 minutes or so it tries to install an update and the install fails, it kicks me out of my vital applications i am using and have to wait for 10-15 minutes for it to resume work.
Susanne - 3 years ago
Frequent interruption of work. An option for postponing the installations e.g. to lunchbreak would be helpful.
Forced closing of applications disturbes communication like Teams - conferences.
Florin - 3 years ago
Software installed finished without success several times. Annoying update without any results, pop up constantly interrupt work.
Margarerte - 3 years ago
Software installed finished without success several times. Annoying update without any results, pop up constantly interrupt work.
Carsten - 3 years ago
Installation always ends not successful
JJ Huang - 3 years ago
google was not installed successfully but keeps reinstall every day and fail every day...
Zoltan - 3 years ago
yes feedback would be great - you never no if it works or not, and when it failes why
Volkmar Wohlfart - 3 years ago
Tool leaves me clueless saying '... not successfully' but I cannot do anything.
Well...
Eric Hurtig - 3 years ago
Stop notifications for Adobe Reader if the tool does not update correctly.
User - 3 years ago
I'm sorry, but it's a terrible tool. Annoying update notifications and forced restarts that endlessly pop up constantly interrupt work.
Installing/uninstalling any software takes forever.
Overall a useless piece of Software
Patrick Rockel - 4 years ago
The UEM agent works fine so far. From my point of view it would be helpful to get to know before clicking "update" whether it will require a reboot or not. I just today and yesterday updated on on software which required to launch again and recently it did not require while I already prepared by closing other applications.
Stefan Röhrich - 4 years ago
Der Kiosk funktioniert und sieht gut aus.
Der Agent bereitet jedoch zu viele Probleme. Selbst die Extended Support Release (ESR)-Version 2006.x erscheint in der Funktion nicht ausgereift. Wann wird das Produkt wieder stabil?
László Nagy - 4 years ago
Software installed finished without success. Do I need to order the software again?
Jordi - 4 years ago
When I slide the mouse over the matrix icon at the bottom right of the screen I got the message :
Es nervt mich nun wirklich. Seit 5 Tagen lasse ich die "Installation" laufen. Sie ist auch nach 5 Tagen nicht beendet, auch wenn ich alle anderen Fenster schliesse wie gewünscht. Es popt 3 mal täglich auf meinem Bildschirm auf und stresst einfach unglaublich. Was ist das Ziel davon, wenn es den Arbeitfluss non-stop unterbricht.....
Es fängt an zu nerven. Seit Tagen poppt alle 15 Minuten das Fenster über meinem Arbeitsbereich auf und versucht, die Pulse Secure Software zu deinstallieren. Leider erfolglos, weil diese Software nicht auf meinem Rechner gefunden wird. Das stört den Arbeitsfluss enorm!!!
The update often fails without visible reason and there is no option for retry
Schrott als Dauerschleife. 5 bis 10 mal am Tag poppt ein Fenster auf und stört bei der Arbeit.
Every time I log on UEM tries to update but fails just to irritate me later. Absolutely rubbish!!!
Every day when I start the computer, I get a message from the Empirum client (v. 21.0.1) that it wants to update to v 21.0.1 and it does.
Every day the update is successful.
Why does the client update itself every day if it has the same version???
Several unsuccessful installation attempts per day. Slows down my work and very annoying.
Problems do not need upgrades.
Get lost.
Why can I not adopt the width of the colums? I cannot see the version of the application which is installed on my computer.
keine Möglichkeit von Auswahl, Abbruch
keine Steuermöglichkeiten
Update does not work. Period. Please stop annoying me.
Not so good. the auto update is not working properly (visual ++ by example) we need very fast a feature to allow the agent to rollback if the update failed ...
we got too massive upload/download of log files for somes computers.
the 3 last UEM agent were not very reliable ...
Hi,
Please stop installing Acrobat DC version 32bits.
Thanks,
Es kommt immer wieder die Meldung "Installation fehlgeschlagen" ohne zu wissen, weshalb. Es ist sehr nervig, wenn immer wieder diese fehlgeschlagenen Installationsverusche aufpoppen.
Es kommt immer wieder die Meldung "Installation fehlgeschlagen" Ich vermisse hier, warum die Installation fehlgeschlagen ist? Könnte man da User-seitig noch was verbessern (alle Programme beenden, Prozesse beenden, etc.). Es ist sehr nervig, wenn immer wieder diese fehlgeschlagenen Installationsverusche aufpoppen.
* update-Verlauf: Kommentar von Markus (1 week ago): sehe ich auch so Vorschlag: updates in liste aufführen, mit Status dahinter: fehlgeschlagen, erneuter Installationsversuch am Datum, um Uhrzeit; erfolgreich.
* Kommentarfunktion: Es wäre gut, wenn man für Kommentare andere Benutzer voten könnte, bzw. sich auf diese beziehen könnte. Entweder durch Antworten auf einen Kommentar oder durch Bezug auf die Zeitangabe, diese müsste dann aber auch in den Kommentare in der Form: Datum - Uhrzeit stehen - ein Angabe 1 week ago ist hier nicht hilfreich.
updates, die fehlschlagen, verschwinden einfach. ist das update nun irgendwann erfolgreich nachgeholt worden? oder hängt das noch? was ist in der vergangenheit installiert worden? keine ahnung. der client gibt diese Info nicht her.
ich kann ein Update verschieben, aber ich kann nicht am Ende des Tages sagen: jetzt wäre gut
"Installieren und herunterfahren" - nur dass man nirgends sehen kann, was installiert werden soll. Muss doch aber möglich sein, wenn das Paket scheinbar auch schon vom Server gezogen wurde...
ne gar kein bock hahaha
eowp.exe wird nicht beendet und verhindert das Herunterfahren
Fenster popt immer auf ohne update... nervig
Sync between Server and Empirum Agent not pretty good.
Software always gives oppurtunity to install and reboot, also
there is no new software !
Also meine erfahrungen sind wirklich nicht besonders.
Der Client hängt oft mit schwarzem bildschirm und zwingt mich unnötiger weise zu einem neustart.
Installationsvorgänge schlagen häufig fehl und halten mich von der eigenlichen arbeit ab.
Das verschieben von installationen funktioniert auch nicht immer und teilweise wird sogar für das gleich softwarepaket mehrmals am tag ein zeitpunkt für die installation angefragt, obwohl dieser schon mit "morgen" bestimmt wurde. Das nervt einfach nur !!!
Ich kann mir nicht vorstellen, das es heutzutage keine bessere art und weise gibt software zu diesem thema bereitzustellen !
Im grunde sollte diese software für den anwender einfach unbemerkt im hintergrund seine arbeit machen und kein weiteres problem für anwender und it werden.
I dont have access
a better synchronization between client and server and in empirum smarter structure which works for all perfect and better explanation for installation error logs
Das Update wurde "erfolglos beendet", weil Outlook nicht beendet werden konnte.
Die Updats funktionieren nicht. Wenn diese Vorgehensweise unsere Zukunft ist, dann sehe ich sehr schwarz für diese Firmen die das benutzen.
Ich bin sehr zufrieden damit!
Not functional as expected. When a installation is running if you refresh the tab "task" the installation disapear and you can't see them anymore... , the right clikc on the tray icon have the same beahviour.
Like others before:
An installation fails, but Matrix is trying it again and again and for me as user no way? to stop this ridiculous behaviour, and IT dept will take many days to fix it.
Very annoying
Matrix42 runs into error and didn't get the deinstallation done. It pops up since one week
Google Earth: nachdem ich auf installieren drückte ist ....nichts passiert. Hängt in der Warteschleife fest, ohne dass sich etwas daran ändert. Passiert immer wieder das selbe mit diesem Programm wenn ich nach einer Zeit abbreche und es erneut versuche (im homeoffice).
Die anderen Programme, die ich im Büro installiert habe, wurden reibungslos installiert. Danke!
same user as from comment below. It's doing the same installation as yesterday. And I am only able to view this feedback form when downloading the install - when postponing the window closes before I can take any action.
+1: Dauerinstallationen: Matrix sollte nicht stupide die Installation (evtl. auch fehlerhafter) Packages wiederholen. Nach x Versuchen bitte nicht mehr die Installation versuchen, sondern Rückmeldung an Admin oder ähnliches.
+ multiple requests for an update everyday even though I postponed it to the next.
if I install from Homeoffice (vpn) after the reboot my installation fails (I'm guessing bc no intranet). Then the cycles repeats. useless...
Resourcenverschwendung: für solch eine Anwendung sollte kein kompletter Chromium verwendet werden.
Dauerinstallationen: Matrix sollte nicht stupide die Installation (evtl. auch fehlerhafter) Packages zu wiederholen. Nach x Versuchen bitte nicht mehr die Installation versuchen, sondern Rückmeldung an Admin oder ähnliches.
Matrix42 Patch-Management Client Fix 20.0 => Finsihed without sucess An error occured during the Installation
Das ist alles? Was soll der Anwender nun tun? Wie soll das funktionieren???
dfsf
Verbindung zum Server nicht möglich. Was ist da los? #vote
Ich bin genervt feststellen zu müssen, dass hier bereits seit über 4 Monaten über die Problematik berichtet wird ohne das dieser bug zwischenzeitlich gefixt wurde. ich kann mich also nur meinen Vorrednern anschließen und eine Kerze ins Fenster stellen mit der Hoffnung, dass dieser erfolglose sich stündlich wiederholende Installationswahnsinn bald ein Ende hat.
Every day Matrix tries several times to update the OneIdentityDefenderDesktopLogin on my Dell Latitude E5530 and fails. The installation is been aborted with no error message. It just says "Erfolglos beendet".
currently, I'm getting an Update of Azure Information Protection v2.8.85.0 every ½ hour ALL OVER AGAIN asking me to close any open Office App (Word, Excel etc.) additionally closing Outlook WITHOUT any prior notification.
Has been like this for three days in a row now!
I'm starting to get furious!!
Forced Reboots are a No-Go!
After Installation a shutdown/restart is initiated without any possibility to intervene or even save my work.
All unsaved things are lost in the process.
Please Fix this issue.
Das Programm ist ne absolute Katastrophe. Andauernd popt ein komplett schwarzes Fenster auf, das sich nur über den Taskmanager mit Kill Process schließen lässt. Das behindert dermaßen die Arbeit da das Fenster immer wieder in den Vordergrund tritt. GEHT GAR NICHT !!!
Ich darf mich meinen Vorgängern anschließen: Es wird andauernd versucht, dasselbe Update einzuspielen, obwohl die Installation erfolgreich war. Das stört auf Dauer, zumal die betroffenen Programme dafür geschlossen werden müssten, es erscheint ein entsprechender Hinweis. Die Matrix scheint Unter-Unterversionen nicht zu erkennen, um entscheiden zu können, ob ein Update erforderlich ist oder nicht.
install “SAP C4C Add-in for Microsoft Excel”but failed every time,try to install with wireless network or wired network but all failed
In letzter zeit die totale Katastrophe.
Arbeiten ist kaum möglich, da der Client permanent das gleiche installiert
Software keeps trying to load and fails, repeats and fails, repeats and fails, on and on without resolution! Please fix this or remove it from my computer, it shows up every 20 minutes trying to load.
Funktioniert einfach nicht. Läuft dauerhaft auf Fehler 503
This Installer keeps opening up since a few days and wants do do something. But it fails to accomplish whatever it tries. I have successfully connected via VPN to UHH but that did not enable this Software to do any better.
Update VPN Client vom Tool fehlgeschlagen - nun deinstalliert, . HomeOffice somit ohne Verbindung zum Server in RK.
Your Tool deinstalled my VPN Client because it wanted to install "a newer version" which was supposed to take only 5 minutes. Well, de-installation of the "older" VPN Client was officially not successful after 20 minutes, even though all of the data was deleted for good. The installation of the "new" VPN Client was unsuccessful. NOW I HAVE TO WORK without VPN from home ? - But that is not possible !!! I will have to drive now for 110 km to my headquarters to get that fixed (let it be fixed by some Admin) - of course I am not getting paid for that and I have to visit the headquarters even though there is the corona shut down. If You Programmers only knew how much havoc You cause by releasing programs that just don't work as promised. Your program is a piece of BS to me which causes unforeseen extra effort on my side to do away with the effects Your miserable program has caused. I hope my company does not prolong the contract with You.
Bei poppt immer ein schwarzes Fenster ohne Inhalt auf. Dieses lässt sich nur über den Taskmanager mit Prozess beenden schließen.
INFORMATION: this feedback-feature is just to give the developers from Matrix42 feedback.
it is NOT for complaining over bad packages from your IT-Department.
If you have problems with packages, contact your IT-Department, most of the time they dont even know that you got errors.
Rocking 2006.X Extended Support, almost flawless. Keep up the good work Matrix.
Wie oft wollt ihr noch den vergeblichen Versuch starten Unify zu installieren ohne vorher die notwendigen Microsoft Zusatzprogramme zu installieren?
Installation of Visio has been unsuccessful for over a week now. Unreliable.
2019 Revit deployment has constantly downloaded but is constantly Erroring out. This has been going on for a week.
3rd attempt to install the first package. Not good
For the last few weeks I seem to be stuck in a perpetual boot loop due to a Windows 1909 UMI update. It looks like it is some sort of language related part of Windows. The update keeps failing and trying again multiple times each day, and it needs a reboot every time!
Software installation is failing every time.
Too slow, Installing software takes forever! Not usable.
Software install finished without success several times.
Every 20 minutes or so it tries to install an update and the install fails, it kicks me out of my vital applications i am using and have to wait for 10-15 minutes for it to resume work.
Frequent interruption of work. An option for postponing the installations e.g. to lunchbreak would be helpful.
Forced closing of applications disturbes communication like Teams - conferences.
Software installed finished without success several times. Annoying update without any results, pop up constantly interrupt work.
Software installed finished without success several times. Annoying update without any results, pop up constantly interrupt work.
Installation always ends not successful
google was not installed successfully but keeps reinstall every day and fail every day...
yes feedback would be great - you never no if it works or not, and when it failes why
Tool leaves me clueless saying '... not successfully' but I cannot do anything.
Well...
Stop notifications for Adobe Reader if the tool does not update correctly.
I'm sorry, but it's a terrible tool. Annoying update notifications and forced restarts that endlessly pop up constantly interrupt work.
Installing/uninstalling any software takes forever.
Overall a useless piece of Software
The UEM agent works fine so far. From my point of view it would be helpful to get to know before clicking "update" whether it will require a reboot or not. I just today and yesterday updated on on software which required to launch again and recently it did not require while I already prepared by closing other applications.
Der Kiosk funktioniert und sieht gut aus.
Der Agent bereitet jedoch zu viele Probleme. Selbst die Extended Support Release (ESR)-Version 2006.x erscheint in der Funktion nicht ausgereift. Wann wird das Produkt wieder stabil?
Software installed finished without success. Do I need to order the software again?
When I slide the mouse over the matrix icon at the bottom right of the screen I got the message :
"Server connection not available! "
test